Ceralun (A+B) Lilac (20g pack)
Special Price 2,85 € Tavahind 5,69 €
Laos
Ainult 1 on jäänud
SKU
AP02020010-(EXP)
Please note that discounted items have reduced prices due to recommend best before date for Ceralun (2025.03), although it's perfectly fine to be used within few months afterwards!
Ceralun is a versatile and strong two-component, high-performance ceramic epoxy composite, which has been especially developed for the application of crystals.
It has optimal adhesive characteristics for applications on metal, glass, crystal, glue-able plastic surfaces, rubber, wood, cork, and porcelain. In addition, the mirrored surface of the crystal is protected against mechanical stress by the gentle build-up of adhesion, the optimized load transmission, and the maximum elasticity.
KEY FEATURES:
• Specifically developed and tailored to embed foiled and unfoiled crystals.
• High level of hardness, rigidity and shock absorbance.
• Resistant to perspiration, humidity or climatic changes and shows no aging.
• Allows new design possibilities.
• Perfect material to generate a large variety of surfaces and structures.
• Applicable on 3D-shaped surfaces.
• Alternative solution to gluing.
HELPFUL HINTS:
• Do not deviate from the recommended mixing ratio of the components (resin/hardener), 1:1.
• Take care to mix the two components thoroughly until a homogenous appearance is achieved.
• Reduce the processing time of a maximum of two hours as a temperature of 23°C.
• Take care to gently remove any condensed water that occurs during the defrosting process.
• Make sure not to exceed the recommended time of 24 hours when Ceralunâ„¢ is stored in a freezer at a temperature of around -20°C (or -4°F).
• Storing Ceralun in a freezer, it makes it easier for you to remove it from the mold.
KEY FEATURES:
• Specifically developed and tailored to embed foiled and unfoiled crystals.
• High level of hardness, rigidity and shock absorbance.
• Resistant to perspiration, humidity or climatic changes and shows no aging.
• Allows new design possibilities.
• Perfect material to generate a large variety of surfaces and structures.
• Applicable on 3D-shaped surfaces.
• Alternative solution to gluing.
HELPFUL HINTS:
• Do not deviate from the recommended mixing ratio of the components (resin/hardener), 1:1.
• Take care to mix the two components thoroughly until a homogenous appearance is achieved.
• Reduce the processing time of a maximum of two hours as a temperature of 23°C.
• Take care to gently remove any condensed water that occurs during the defrosting process.
• Make sure not to exceed the recommended time of 24 hours when Ceralunâ„¢ is stored in a freezer at a temperature of around -20°C (or -4°F).
• Storing Ceralun in a freezer, it makes it easier for you to remove it from the mold.
Tootja asukohamaa | Saksamaa |
---|---|
Liik | Ceralun savi |
Värv | Lilac |
Suurus | 20g |
Kogus pakis | 20g |
Ohutusalane teave | Võib põhjustada allergilist nahareaktsiooni. Põhjustab tõsist silmade ärritust. Kahjulik veeloomadele pikaajalise toimega. Kandke kaitsekindad, riided, silmade ja näo kaitse |